Does the Peugeot 106 have more suspension problems than other cars its age?

Peugeot 106s do have suspension problems recorded, but less often than other cars their age.

per 100 tests
18.35 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 30.29 per 100 tests

One test can record several defects, so this is not the share of Peugeot 106s.

Data: DVSA MOT results · 2019–2024 · 53,365 tests

Check a Peugeot 106 by registration

How often do suspension advisories on Peugeot 106s turn into fails?

19.1% of suspension advisories on Peugeot 106s turned into suspension fails at the next MOT.

Typically, the next MOT came 12 months and 2,624 miles later.

Based on 5,659 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which suspension problem is recorded most on the Peugeot 106?

Rust near suspension or subframe mounts: recorded 4,485 times in 2019–2024, or 8.40 per 100 tests.

The metal near a suspension, spring or subframe mounting is badly rusted, damaged or poorly repaired, which fails the MOT.

What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.

Check a Peugeot 106 by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which suspension problems should I check for on a used Peugeot 106?

The suspension defects recorded most often on Peugeot 106s, 2019–2024, per 100 tests.

  • Rust near suspension or subframe mounts8.40
    Major

    What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.

  • Worn suspension bush or joint3.47
    Major

    What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.

  • Suspension joint cover perished1.55
    Minor

    What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.

  • Suspension joint cover split or missing0.97
    Major

    What to check: Ask whether the ball joint was replaced along with its cover: a joint that ran unprotected wears quickly and knocks over bumps.

  • Wheel bearing rough or noisy0.76
    Major

    What to check: Listen for a hum or growl at speed that changes as you steer gently left and right.

One test can record several defects, so this is not the share of Peugeot 106s.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Peugeot 106: suspension defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repairedRust near suspension or subframe mounts4,4858.4
A suspension pin, bush or joint excessively wornWorn suspension bush or joint1,8543.47
A suspension joint dust cover severely deterioratedSuspension joint cover perished8251.55
A suspension joint dust cover missing or no longer prevents the ingress of dirt etcSuspension joint cover split or missing5190.97
A wheel bearing excessively roughWheel bearing rough or noisy4080.76

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 53,365 initial tests. The difference is −11.94 defects per 100 tests (95% interval −12.41 to −11.48).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on suspension