Does the Perodua Myvi have more suspension problems than other cars its age?

Perodua Myvis do have suspension problems recorded, but less often than other cars their age.

per 100 tests
12.28 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 21.32 per 100 tests

One test can record several defects, so this is not the share of Perodua Myvis.

Data: DVSA MOT results · 2019–2024 · 13,909 tests

Check a Perodua Myvi by registration

How often do suspension advisories on Perodua Myvis turn into fails?

13.2% of suspension advisories on Perodua Myvis turned into suspension fails at the next MOT.

Typically, the next MOT came 12 months and 4,829 miles later.

Based on 3,264 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which suspension problem is recorded most on the Perodua Myvi?

Worn suspension bush or joint: recorded 1,086 times in 2019–2024, or 7.81 per 100 tests.

A suspension bush, pin or ball joint has worn loose, which makes the handling vague and fails the MOT.

What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.

Check a Perodua Myvi by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which suspension problems should I check for on a used Perodua Myvi?

The suspension defects recorded most often on Perodua Myvis, 2019–2024, per 100 tests.

  • Worn suspension bush or joint7.81
    Major

    What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.

  • Suspension joint cover perished0.99
    Minor

    What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.

  • Shock absorber leaking or failed0.63
    Major

    What to check: Look behind the wheels for oily, wet shock absorbers, and push down hard on each corner: it should rise once and settle.

  • Suspension joint cover split or missing0.47
    Major

    What to check: Ask whether the ball joint was replaced along with its cover: a joint that ran unprotected wears quickly and knocks over bumps.

  • A suspension pin, bush, joint or bearing excessively worn0.39

    What to check: Ask the seller what was repaired, and when.

One test can record several defects, so this is not the share of Perodua Myvis.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Perodua Myvi: suspension defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
A suspension pin, bush or joint excessively wornWorn suspension bush or joint1,0867.81
A suspension joint dust cover severely deterioratedSuspension joint cover perished1380.99
A shock absorber damaged to the extent that it does not function or showing signs of severe leakageShock absorber leaking or failed870.63
A suspension joint dust cover missing or no longer prevents the ingress of dirt etcSuspension joint cover split or missing660.47
A suspension pin, bush, joint or bearing excessively wornA suspension pin, bush, joint or bearing excessively worn540.39

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 13,909 initial tests. The difference is −9.04 defects per 100 tests (95% interval −9.81 to −8.27).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on suspension