Does the Nissan Cube have more suspension problems than other cars its age?
Nissan Cubes have suspension problems recorded about as often as other cars their age.
- per 100 tests
- 21.03 per 100 testsdefects recorded at first MOT tests
Expected for cars of the same age: 21.87 per 100 tests
One test can record several defects, so this is not the share of Nissan Cubes.
Data: DVSA MOT results · 2019–2024 · 15,125 tests
Check a Nissan Cube by registration
How often do suspension advisories on Nissan Cubes turn into fails?
23.8% of suspension advisories on Nissan Cubes turned into suspension fails at the next MOT.
Typically, the next MOT came 12 months and 5,755 miles later.
Based on 2,209 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.
Which suspension problem is recorded most on the Nissan Cube?
Worn suspension bush or joint: recorded 1,611 times in 2019–2024, or 10.65 per 100 tests.
A suspension bush, pin or ball joint has worn loose, which makes the handling vague and fails the MOT.
What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.
Check a Nissan Cube by registration
Which suspension problems should I check for on a used Nissan Cube?
The suspension defects recorded most often on Nissan Cubes, 2019–2024, per 100 tests.
- Worn suspension bush or joint10.65Major
What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.
- Suspension joint cover perished4.24Minor
What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.
- Suspension joint cover split or missing2.11Major
What to check: Ask whether the ball joint was replaced along with its cover: a joint that ran unprotected wears quickly and knocks over bumps.
- Rust near suspension or subframe mounts1.40Major
What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.
- Suspension joint close to coming apart0.63Dangerous
What to check: Ask for the invoice naming the repaired part, and have a garage check any knocks before you buy.
One test can record several defects, so this is not the share of Nissan Cubes.
Each tip applies only if the car you are looking at has that fault in its own MOT history.
All DVSA descriptions in this group (5)
| DVSA description | In plain words | Recorded | Per 100 tests |
|---|---|---|---|
| A suspension pin, bush or joint excessively worn | Worn suspension bush or joint | 1,611 | 10.65 |
| A suspension joint dust cover severely deteriorated | Suspension joint cover perished | 642 | 4.24 |
| A suspension joint dust cover missing or no longer prevents the ingress of dirt etc | Suspension joint cover split or missing | 319 | 2.11 |
| The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired | Rust near suspension or subframe mounts | 211 | 1.4 |
| A suspension pin, bush or joint likely to become detached | Suspension joint close to coming apart | 96 | 0.63 |
How are these figures calculated?
Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.
The comparison uses 15,125 initial tests. The difference is −0.84 defects per 100 tests (95% interval −1.58 to −0.09).
More on the Nissan Cube
- Overview:
- Model overview · All Nissan models
- What fails:
- body · brakes · plates · lights · emissions · wheels · seat belts · steering · suspension · tyres · visibility
- By area:
- Postcode areas
- Similar cars on suspension:
- Mercedes-Benz V · Volvo XC40
- Group ranking:
- All cars on suspension