Does the Hyundai iLoad have more brake problems than other vans its age?

Hyundai iLoads have brake problems recorded more often than other vans their age.

per 100 tests
28.64 per 100 testsdefects recorded at first MOT tests

Expected for vans of the same age: 18.83 per 100 tests

One test can record several defects, so this is not the share of Hyundai iLoads.

Data: DVSA MOT results · 2019–2024 · 5,495 tests

Check a Hyundai iLoad by registration

How often do brake advisories on Hyundai iLoads turn into fails?

19.7% of brake advisories on Hyundai iLoads turned into brake fails at the next MOT.

Typically, the next MOT came 12 months and 6,095 miles later.

Based on 1,192 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which brake problem is recorded most on the Hyundai iLoad?

Handbrake too weak: recorded 257 times in 2019–2024, or 4.68 per 100 tests.

The handbrake did not hold strongly enough on the brake tester, which fails the MOT.

What to check: Check the handbrake holds the car on a steep slope without the lever rising to the top of its travel.

Check a Hyundai iLoad by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which brake problems should I check for on a used Hyundai iLoad?

The brake defects recorded most often on Hyundai iLoads, 2019–2024, per 100 tests.

  • Handbrake too weak4.68
    Major

    What to check: Check the handbrake holds the car on a steep slope without the lever rising to the top of its travel.

  • Handbrake working on one side only3.75
    Major

    What to check: Ask whether a handbrake cable or rear caliper was replaced, and check the handbrake holds the car on a slope.

  • Brake pads or shoes dangerously thin3.37
    Dangerous

    What to check: Look through the wheels at the pads and discs, listen for grinding, and ask when they were last replaced.

  • Brake dragging when released3.33
    Major

    What to check: Check the car rolls freely when coasting and does not pull to one side.

  • Brake pipe rusted or damaged2.91
    Major

    What to check: Look along the underside at the metal brake pipes for flaking rust, and ask whether they were renewed.

One test can record several defects, so this is not the share of Hyundai iLoads.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Hyundai iLoad: brake defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
Parking brake efficiency below minimum requirementHandbrake too weak2574.68
Parking brake inoperative on one sideHandbrake working on one side only2063.75
a brake lining or pad worn below 1.5mmBrake pads or shoes dangerously thin1853.37
Significant brake effort recorded with no brake applied indicating a binding brakeBrake dragging when released1833.33
Brake pipe damaged or excessively corrodedBrake pipe rusted or damaged1602.91

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for vans with the same mix of ages.

The comparison uses 5,495 initial tests. The difference is +9.81 defects per 100 tests (95% interval +8.40 to +11.23).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on brakes