Does the Triumph TR6 have more suspension problems than other cars its age?
Triumph TR6s do have suspension problems recorded, but less often than other cars their age.
- per 100 tests
- 6.67 per 100 testsdefects recorded at first MOT tests
Expected for cars of the same age: 19.34 per 100 tests
One test can record several defects, so this is not the share of Triumph TR6s.
Data: DVSA MOT results · 2019–2024 · 6,765 tests
Check a Triumph TR6 by registration
How often do suspension advisories on Triumph TR6s turn into fails?
4.7% of suspension advisories on Triumph TR6s turned into suspension fails at the next MOT.
Typically, the next MOT came 13 months and 572 miles later.
Based on 511 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.
Which suspension problem is recorded most on the Triumph TR6?
Suspension joint cover perished: recorded 119 times in 2019–2024, or 1.76 per 100 tests.
The rubber cover on a suspension ball joint is badly perished but still keeps dirt out, so it is minor and the car passes.
What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.
Check a Triumph TR6 by registration
Which suspension problems should I check for on a used Triumph TR6?
The suspension defects recorded most often on Triumph TR6s, 2019–2024, per 100 tests.
- Suspension joint cover perished1.76Minor
What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.
- Wheel bearing with play1.15Major
What to check: Ask whether the bearing was replaced, and listen for a hum or growl that rises with speed on the test drive.
- Suspension joint cover split or missing0.86Major
What to check: Ask whether the ball joint was replaced along with its cover: a joint that ran unprotected wears quickly and knocks over bumps.
- Worn suspension bush or joint0.77Major
What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.
- Rust near suspension or subframe mounts0.74Major
What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.
One test can record several defects, so this is not the share of Triumph TR6s.
Each tip applies only if the car you are looking at has that fault in its own MOT history.
All DVSA descriptions in this group (5)
| DVSA description | In plain words | Recorded | Per 100 tests |
|---|---|---|---|
| A suspension joint dust cover severely deteriorated | Suspension joint cover perished | 119 | 1.76 |
| A wheel bearing with excessive play | Wheel bearing with play | 78 | 1.15 |
| A suspension joint dust cover missing or no longer prevents the ingress of dirt etc | Suspension joint cover split or missing | 58 | 0.86 |
| A suspension pin, bush or joint excessively worn | Worn suspension bush or joint | 52 | 0.77 |
| The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired | Rust near suspension or subframe mounts | 50 | 0.74 |
How are these figures calculated?
Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.
The comparison uses 6,765 initial tests. The difference is −12.67 defects per 100 tests (95% interval −13.72 to −11.63).
More on the Triumph TR6
- Overview:
- Model overview
- What fails:
- body · brakes · lights · emissions · seat belts · steering · suspension · tyres · visibility
- By area:
- Postcode areas
- Group ranking:
- All cars on suspension