Does the Toyota Land Cruiser have more suspension problems than other cars its age?

Toyota Land Cruisers have suspension problems recorded about as often as other cars their age.

per 100 tests
25.86 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 24.90 per 100 tests

One test can record several defects, so this is not the share of Toyota Land Cruisers.

Data: DVSA MOT results · 2019–2024 · 140,330 tests

Check a Toyota Land Cruiser by registration

How often do suspension advisories on Toyota Land Cruisers turn into fails?

22.1% of suspension advisories on Toyota Land Cruisers turned into suspension fails at the next MOT.

Typically, the next MOT came 12 months and 5,134 miles later.

Based on 28,448 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which suspension problem is recorded most on the Toyota Land Cruiser?

Worn suspension bush or joint: recorded 10,632 times in 2019–2024, or 7.58 per 100 tests.

A suspension bush, pin or ball joint has worn loose, which makes the handling vague and fails the MOT.

What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.

Check a Toyota Land Cruiser by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which suspension problems should I check for on a used Toyota Land Cruiser?

The suspension defects recorded most often on Toyota Land Cruisers, 2019–2024, per 100 tests.

  • Worn suspension bush or joint7.58
    Major

    What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.

  • Suspension joint cover perished5.04
    Minor

    What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.

  • Rust near suspension or subframe mounts3.46
    Major

    What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.

  • Suspension joint cover split or missing2.89
    Major

    What to check: Ask whether the ball joint was replaced along with its cover: a joint that ran unprotected wears quickly and knocks over bumps.

  • Shock absorber leaking or failed1.01
    Major

    What to check: Look behind the wheels for oily, wet shock absorbers, and push down hard on each corner: it should rise once and settle.

One test can record several defects, so this is not the share of Toyota Land Cruisers.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Toyota Land Cruiser: suspension defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
A suspension pin, bush or joint excessively wornWorn suspension bush or joint10,6327.58
A suspension joint dust cover severely deterioratedSuspension joint cover perished7,0795.04
The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repairedRust near suspension or subframe mounts4,8543.46
A suspension joint dust cover missing or no longer prevents the ingress of dirt etcSuspension joint cover split or missing4,0602.89
A shock absorber damaged to the extent that it does not function or showing signs of severe leakageShock absorber leaking or failed1,4191.01

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 140,330 initial tests. The difference is +0.96 defects per 100 tests (95% interval +0.70 to +1.23).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on suspension