Does the Porsche 944 have more suspension problems than other cars its age?
Porsche 944s do have suspension problems recorded, but less often than other cars their age.
- per 100 tests
- 12.59 per 100 testsdefects recorded at first MOT tests
Expected for cars of the same age: 19.31 per 100 tests
One test can record several defects, so this is not the share of Porsche 944s.
Data: DVSA MOT results · 2019–2024 · 15,287 tests
Check a Porsche 944 by registration
How often do suspension advisories on Porsche 944s turn into fails?
11.6% of suspension advisories on Porsche 944s turned into suspension fails at the next MOT.
Typically, the next MOT came 12 months and 310 miles later.
Based on 2,032 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.
Which suspension problem is recorded most on the Porsche 944?
Rust near suspension or subframe mounts: recorded 698 times in 2019–2024, or 4.57 per 100 tests.
The metal near a suspension, spring or subframe mounting is badly rusted, damaged or poorly repaired, which fails the MOT.
What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.
Check a Porsche 944 by registration
Which suspension problems should I check for on a used Porsche 944?
The suspension defects recorded most often on Porsche 944s, 2019–2024, per 100 tests.
- Rust near suspension or subframe mounts4.57Major
What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.
- Worn suspension bush or joint2.80Major
What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.
- Suspension joint cover perished0.90Minor
What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.
- Wheel bearing with play0.90Major
What to check: Ask whether the bearing was replaced, and listen for a hum or growl that rises with speed on the test drive.
- Suspension joint cover split or missing0.73Major
What to check: Ask whether the ball joint was replaced along with its cover: a joint that ran unprotected wears quickly and knocks over bumps.
One test can record several defects, so this is not the share of Porsche 944s.
Each tip applies only if the car you are looking at has that fault in its own MOT history.
All DVSA descriptions in this group (5)
| DVSA description | In plain words | Recorded | Per 100 tests |
|---|---|---|---|
| The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired | Rust near suspension or subframe mounts | 698 | 4.57 |
| A suspension pin, bush or joint excessively worn | Worn suspension bush or joint | 428 | 2.8 |
| A suspension joint dust cover severely deteriorated | Suspension joint cover perished | 138 | 0.9 |
| A wheel bearing with excessive play | Wheel bearing with play | 137 | 0.9 |
| A suspension joint dust cover missing or no longer prevents the ingress of dirt etc | Suspension joint cover split or missing | 111 | 0.73 |
How are these figures calculated?
Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.
The comparison uses 15,287 initial tests. The difference is −6.72 defects per 100 tests (95% interval −7.41 to −6.02).
More on the Porsche 944
- Overview:
- Model overview · All Porsche models
- What fails:
- body · brakes · plates · lights · emissions · wheels · seat belts · steering · suspension · tyres · visibility
- By area:
- Postcode areas
- Similar cars on suspension:
- Jeep Grand Cherokee · SEAT Arosa
- Group ranking:
- All cars on suspension