Does the Porsche 928 have more suspension problems than other cars its age?
Porsche 928s do have suspension problems recorded, but less often than other cars their age.
- per 100 tests
- 5.58 per 100 testsdefects recorded at first MOT tests
Expected for cars of the same age: 19.35 per 100 tests
One test can record several defects, so this is not the share of Porsche 928s.
Data: DVSA MOT results · 2019–2024 · 5,000 tests
Check a Porsche 928 by registration
Which suspension problem is recorded most on the Porsche 928?
Rust near suspension or subframe mounts: recorded 55 times in 2019–2024, or 1.10 per 100 tests.
The metal near a suspension, spring or subframe mounting is badly rusted, damaged or poorly repaired, which fails the MOT.
What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.
Check a Porsche 928 by registration
Which suspension problems should I check for on a used Porsche 928?
The suspension defects recorded most often on Porsche 928s, 2019–2024, per 100 tests.
- Rust near suspension or subframe mounts1.10Major
What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.
- Worn suspension bush or joint0.96Major
What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.
- Suspension joint cover perished0.82Minor
What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.
- Suspension joint cover split or missing0.68Major
What to check: Ask whether the ball joint was replaced along with its cover: a joint that ran unprotected wears quickly and knocks over bumps.
- Broken or weakened suspension spring0.62Major
What to check: Look behind each wheel at the coil springs for a snapped end, and check the car sits level from side to side.
One test can record several defects, so this is not the share of Porsche 928s.
Each tip applies only if the car you are looking at has that fault in its own MOT history.
All DVSA descriptions in this group (5)
| DVSA description | In plain words | Recorded | Per 100 tests |
|---|---|---|---|
| The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired | Rust near suspension or subframe mounts | 55 | 1.1 |
| A suspension pin, bush or joint excessively worn | Worn suspension bush or joint | 48 | 0.96 |
| A suspension joint dust cover severely deteriorated | Suspension joint cover perished | 41 | 0.82 |
| A suspension joint dust cover missing or no longer prevents the ingress of dirt etc | Suspension joint cover split or missing | 34 | 0.68 |
| A spring or spring component fractured or seriously weakened | Broken or weakened suspension spring | 31 | 0.62 |
How are these figures calculated?
Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.
The comparison uses 5,000 initial tests. The difference is −13.77 defects per 100 tests (95% interval −14.99 to −12.55).
More on the Porsche 928
- Overview:
- Model overview · All Porsche models
- What fails:
- body · brakes · plates · lights · emissions · seat belts · steering · suspension · tyres · visibility
- By area:
- Postcode areas
- Similar cars on suspension:
- Honda Freed · Mercedes-Benz Sprinter
- Group ranking:
- All cars on suspension