Does the Mercedes-Benz C-Class have more brake problems than other cars its age?

Mercedes-Benz C-Class models have brake problems recorded about as often as other cars their age.

per 100 tests
10.63 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 10.78 per 100 tests

One test can record several defects, so this is not the share of Mercedes-Benz C-Class models.

Data: DVSA MOT results · 2019–2024 · 2,072,470 tests

Check a Mercedes-Benz C-Class by registration

How often do brake advisories on Mercedes-Benz C-Class models turn into fails?

11.7% of brake advisories on Mercedes-Benz C-Class models turned into brake fails at the next MOT.

Typically, the next MOT came 12 months and 5,948 miles later.

Based on 334,621 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which brake problem is recorded most on the Mercedes-Benz C-Class?

Brake pipe rusted or damaged: recorded 53,244 times in 2019–2024, or 2.57 per 100 tests.

A metal brake pipe is badly rusted or damaged and could leak brake fluid, which fails the MOT.

What to check: Look along the underside at the metal brake pipes for flaking rust, and ask whether they were renewed.

Check a Mercedes-Benz C-Class by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which brake problems should I check for on a used Mercedes-Benz C-Class?

The brake defects recorded most often on Mercedes-Benz C-Class models, 2019–2024, per 100 tests.

  • Brake pipe rusted or damaged2.57
    Major

    What to check: Look along the underside at the metal brake pipes for flaking rust, and ask whether they were renewed.

  • Brake pads or shoes dangerously thin1.46
    Dangerous

    What to check: Look through the wheels at the pads and discs, listen for grinding, and ask when they were last replaced.

  • Handbrake too weak1.16
    Major

    What to check: Check the handbrake holds the car on a steep slope without the lever rising to the top of its travel.

  • Brake dragging when released0.64
    Major

    What to check: Check the car rolls freely when coasting and does not pull to one side.

  • Brake discs or drums worn0.49
    Major

    What to check: Look for a deep lip on the outer edge of the brake discs and feel for judder through the pedal when braking.

One test can record several defects, so this is not the share of Mercedes-Benz C-Class models.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Mercedes-Benz C-Class: brake defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
Brake pipe damaged or excessively corrodedBrake pipe rusted or damaged53,2442.57
a brake lining or pad worn below 1.5mmBrake pads or shoes dangerously thin30,2961.46
Parking brake efficiency below minimum requirementHandbrake too weak23,9581.16
Significant brake effort recorded with no brake applied indicating a binding brakeBrake dragging when released13,2390.64
Brake disc or drum significantly and obviously wornBrake discs or drums worn10,1670.49

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 2,072,470 initial tests. The difference is −0.15 defects per 100 tests (95% interval −0.19 to −0.10).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on brakes