Does the Mazda BT-50 have more brake problems than other vans its age?

Mazda BT-50s have brake problems recorded about as often as other vans their age.

per 100 tests
28 per 100 testsdefects recorded at first MOT tests

Expected for vans of the same age: 28.37 per 100 tests

One test can record several defects, so this is not the share of Mazda BT-50s.

Data: DVSA MOT results · 2019–2024 · 6,506 tests

Check a Mazda BT-50 by registration

How often do brake advisories on Mazda BT-50s turn into fails?

17.7% of brake advisories on Mazda BT-50s turned into brake fails at the next MOT.

Typically, the next MOT came 12 months and 5,298 miles later.

Based on 1,699 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which brake problem is recorded most on the Mazda BT-50?

Brake pipe rusted or damaged: recorded 742 times in 2019–2024, or 11.40 per 100 tests.

A metal brake pipe is badly rusted or damaged and could leak brake fluid, which fails the MOT.

What to check: Look along the underside at the metal brake pipes for flaking rust, and ask whether they were renewed.

Check a Mazda BT-50 by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which brake problems should I check for on a used Mazda BT-50?

The brake defects recorded most often on Mazda BT-50s, 2019–2024, per 100 tests.

  • Brake pipe rusted or damaged11.40
    Major

    What to check: Look along the underside at the metal brake pipes for flaking rust, and ask whether they were renewed.

  • Brake dragging when released2.00
    Major

    What to check: Check the car rolls freely when coasting and does not pull to one side.

  • Brake pads or shoes dangerously thin1.60
    Dangerous

    What to check: Look through the wheels at the pads and discs, listen for grinding, and ask when they were last replaced.

  • Load sensing valve seized or inoperative and ABS functioning1.48

    What to check: Ask the seller what was repaired, and when.

  • Uneven braking side to side1.20
    Major

    What to check: Brake firmly on a quiet straight road and check the car stops in a straight line.

One test can record several defects, so this is not the share of Mazda BT-50s.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Mazda BT-50: brake defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
Brake pipe damaged or excessively corrodedBrake pipe rusted or damaged74211.4
Significant brake effort recorded with no brake applied indicating a binding brakeBrake dragging when released1302
a brake lining or pad worn below 1.5mmBrake pads or shoes dangerously thin1041.6
Load sensing valve seized or inoperative and ABS functioningLoad sensing valve seized or inoperative and ABS functioning961.48
Brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.Uneven braking side to side781.2

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for vans with the same mix of ages.

The comparison uses 6,506 initial tests. The difference is −0.37 defects per 100 tests (95% interval −1.66 to +0.93).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on brakes