Does the Mazda B2500 have more suspension problems than other cars its age?
Mazda B2500s do have suspension problems recorded, but less often than other cars their age.
- per 100 tests
- 29.97 per 100 testsdefects recorded at first MOT tests
Expected for cars of the same age: 31.56 per 100 tests
One test can record several defects, so this is not the share of Mazda B2500s.
Data: DVSA MOT results · 2019–2024 · 12,355 tests
Check a Mazda B2500 by registration
How often do suspension advisories on Mazda B2500s turn into fails?
23.0% of suspension advisories on Mazda B2500s turned into suspension fails at the next MOT.
Typically, the next MOT came 12 months and 3,233 miles later.
Based on 2,365 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.
Which suspension problem is recorded most on the Mazda B2500?
Rust near suspension or subframe mounts: recorded 822 times in 2019–2024, or 6.65 per 100 tests.
The metal near a suspension, spring or subframe mounting is badly rusted, damaged or poorly repaired, which fails the MOT.
What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.
Check a Mazda B2500 by registration
Which suspension problems should I check for on a used Mazda B2500?
The suspension defects recorded most often on Mazda B2500s, 2019–2024, per 100 tests.
- Rust near suspension or subframe mounts6.65Major
What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.
- Suspension joint cover perished5.79Minor
What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.
- Worn suspension bush or joint5.27Major
What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.
- Worn shock absorber bush2.65Major
What to check: Listen for knocking from each corner over bumps and ask whether the shock absorber mounts were replaced.
- Suspension joint cover split or missing2.05Major
What to check: Ask whether the ball joint was replaced along with its cover: a joint that ran unprotected wears quickly and knocks over bumps.
One test can record several defects, so this is not the share of Mazda B2500s.
Each tip applies only if the car you are looking at has that fault in its own MOT history.
All DVSA descriptions in this group (5)
| DVSA description | In plain words | Recorded | Per 100 tests |
|---|---|---|---|
| The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired | Rust near suspension or subframe mounts | 822 | 6.65 |
| A suspension joint dust cover severely deteriorated | Suspension joint cover perished | 715 | 5.79 |
| A suspension pin, bush or joint excessively worn | Worn suspension bush or joint | 651 | 5.27 |
| A shock absorber bush excessively worn | Worn shock absorber bush | 328 | 2.65 |
| A suspension joint dust cover missing or no longer prevents the ingress of dirt etc | Suspension joint cover split or missing | 253 | 2.05 |
How are these figures calculated?
Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.
The comparison uses 12,355 initial tests. The difference is −1.59 defects per 100 tests (95% interval −2.58 to −0.60).
More on the Mazda B2500
- Overview:
- Model overview · All Mazda models
- What fails:
- body · brakes · plates · lights · emissions · wheels · seat belts · steering · suspension · tyres · visibility
- By area:
- Postcode areas
- Similar cars on suspension:
- Mitsubishi L200 · Peugeot 508
- Group ranking:
- All cars on suspension