Does the Land Rover Freelander have more suspension problems than other cars its age?

Land Rover Freelanders do have suspension problems recorded, but less often than other cars their age.

per 100 tests
19.64 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 23.48 per 100 tests

One test can record several defects, so this is not the share of Land Rover Freelanders.

Data: DVSA MOT results · 2019–2024 · 853,388 tests

Check a Land Rover Freelander by registration

How often do suspension advisories on Land Rover Freelanders turn into fails?

22.4% of suspension advisories on Land Rover Freelanders turned into suspension fails at the next MOT.

Typically, the next MOT came 12 months and 5,452 miles later.

Based on 106,138 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which suspension problem is recorded most on the Land Rover Freelander?

Worn suspension bush or joint: recorded 47,243 times in 2019–2024, or 5.54 per 100 tests.

A suspension bush, pin or ball joint has worn loose, which makes the handling vague and fails the MOT.

What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.

Check a Land Rover Freelander by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which suspension problems should I check for on a used Land Rover Freelander?

The suspension defects recorded most often on Land Rover Freelanders, 2019–2024, per 100 tests.

  • Worn suspension bush or joint5.54
    Major

    What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.

  • Suspension joint cover perished3.52
    Minor

    What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.

  • Suspension joint cover split or missing2.80
    Major

    What to check: Ask whether the ball joint was replaced along with its cover: a joint that ran unprotected wears quickly and knocks over bumps.

  • Rust near suspension or subframe mounts1.86
    Major

    What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.

  • Shock absorber leaking or failed1.47
    Major

    What to check: Look behind the wheels for oily, wet shock absorbers, and push down hard on each corner: it should rise once and settle.

One test can record several defects, so this is not the share of Land Rover Freelanders.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Land Rover Freelander: suspension defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
A suspension pin, bush or joint excessively wornWorn suspension bush or joint47,2435.54
A suspension joint dust cover severely deterioratedSuspension joint cover perished30,0453.52
A suspension joint dust cover missing or no longer prevents the ingress of dirt etcSuspension joint cover split or missing23,9242.8
The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repairedRust near suspension or subframe mounts15,8551.86
A shock absorber damaged to the extent that it does not function or showing signs of severe leakageShock absorber leaking or failed12,5651.47

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 853,388 initial tests. The difference is −3.84 defects per 100 tests (95% interval −3.94 to −3.74).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on suspension