Does the Hyundai i40 have more emissions and leak problems than other cars its age?

Hyundai i40s do have emissions and leak problems recorded, but less often than other cars their age.

per 100 tests
1.03 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 1.80 per 100 tests

One test can record several defects, so this is not the share of Hyundai i40s.

Data: DVSA MOT results · 2019–2024 · 133,835 tests

Check a Hyundai i40 by registration

How often do emissions and leak advisories on Hyundai i40s turn into fails?

3.5% of emissions and leak advisories on Hyundai i40s turned into emissions and leak fails at the next MOT.

Typically, the next MOT came 12 months and 7,705 miles later.

Based on 2,330 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which emissions and leak problem is recorded most on the Hyundai i40?

Engine warning light on: recorded 702 times in 2019–2024, or 0.52 per 100 tests.

The engine warning light shows a fault, or does not work at all, which fails the MOT.

What to check: Check the engine light goes out after start-up and ask for a fault-code scan: codes can be cleared before a sale.

Check a Hyundai i40 by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which emissions and leak problems should I check for on a used Hyundai i40?

The emissions and leak defects recorded most often on Hyundai i40s, 2019–2024, per 100 tests.

  • Engine warning light on0.52
    Major

    What to check: Check the engine light goes out after start-up and ask for a fault-code scan: codes can be cleared before a sale.

  • Diesel smoke over the limit0.11
    Major

    What to check: Watch the exhaust while someone revs the engine: heavy black smoke points to injector, turbo or particulate filter trouble.

  • Emissions test could not be done0.10
    Major

    What to check: Ask why the test could not be done, and look for oil leaks, warning lights or an engine that runs roughly.

  • Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users0.09

    What to check: Ask the seller what was repaired, and when.

  • Smoke opacity levels exceed default limit0.05

    What to check: Ask the seller what was repaired, and when.

One test can record several defects, so this is not the share of Hyundai i40s.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Hyundai i40: emissions and leak defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
Engine MIL illuminated indicating a malfunctionEngine warning light on7020.52
Smoke opacity levels exceed the manufacturer's specified limitDiesel smoke over the limit1460.11
Emissions test unable to be completedEmissions test could not be done1330.1
Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road usersFluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users1160.09
Smoke opacity levels exceed default limitSmoke opacity levels exceed default limit660.05

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 133,835 initial tests. The difference is −0.77 defects per 100 tests (95% interval −0.84 to −0.70).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on noise, emissions and leaks