Does the Ford Fusion have more brake problems than other cars its age?

Ford Fusions have brake problems recorded about as often as other cars their age.

per 100 tests
19.23 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 20.00 per 100 tests

One test can record several defects, so this is not the share of Ford Fusions.

Data: DVSA MOT results · 2019–2024 · 399,710 tests

Check a Ford Fusion by registration

How often do brake advisories on Ford Fusions turn into fails?

17.6% of brake advisories on Ford Fusions turned into brake fails at the next MOT.

Typically, the next MOT came 12 months and 4,102 miles later.

Based on 89,131 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which brake problem is recorded most on the Ford Fusion?

Brake pipe rusted or damaged: recorded 32,005 times in 2019–2024, or 8.01 per 100 tests.

A metal brake pipe is badly rusted or damaged and could leak brake fluid, which fails the MOT.

What to check: Look along the underside at the metal brake pipes for flaking rust, and ask whether they were renewed.

Check a Ford Fusion by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which brake problems should I check for on a used Ford Fusion?

The brake defects recorded most often on Ford Fusions, 2019–2024, per 100 tests.

  • Brake pipe rusted or damaged8.01
    Major

    What to check: Look along the underside at the metal brake pipes for flaking rust, and ask whether they were renewed.

  • Handbrake too weak1.33
    Major

    What to check: Check the handbrake holds the car on a steep slope without the lever rising to the top of its travel.

  • Uneven braking side to side1.26
    Major

    What to check: Brake firmly on a quiet straight road and check the car stops in a straight line.

  • Brake pads or shoes dangerously thin0.95
    Dangerous

    What to check: Look through the wheels at the pads and discs, listen for grinding, and ask when they were last replaced.

  • Brake discs or drums worn0.71
    Major

    What to check: Look for a deep lip on the outer edge of the brake discs and feel for judder through the pedal when braking.

One test can record several defects, so this is not the share of Ford Fusions.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Ford Fusion: brake defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
Brake pipe damaged or excessively corrodedBrake pipe rusted or damaged32,0058.01
Parking brake efficiency below minimum requirementHandbrake too weak5,3281.33
Brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.Uneven braking side to side5,0441.26
a brake lining or pad worn below 1.5mmBrake pads or shoes dangerously thin3,7780.95
Brake disc or drum significantly and obviously wornBrake discs or drums worn2,8250.71

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 399,710 initial tests. The difference is −0.77 defects per 100 tests (95% interval −0.91 to −0.63).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on brakes