Does the Chrysler Crossfire have more emissions and leak problems than other cars its age?
Chrysler Crossfires do have emissions and leak problems recorded, but less often than other cars their age.
- per 100 tests
- 3.89 per 100 testsdefects recorded at first MOT tests
Expected for cars of the same age: 8.67 per 100 tests
One test can record several defects, so this is not the share of Chrysler Crossfires.
Data: DVSA MOT results · 2019–2024 · 13,934 tests
Check a Chrysler Crossfire by registration
How often do emissions and leak advisories on Chrysler Crossfires turn into fails?
4.2% of emissions and leak advisories on Chrysler Crossfires turned into emissions and leak fails at the next MOT.
Typically, the next MOT came 12 months and 2,390 miles later.
Based on 1,133 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.
Which emissions and leak problem is recorded most on the Chrysler Crossfire?
Engine warning light on: recorded 245 times in 2019–2024, or 1.76 per 100 tests.
The engine warning light shows a fault, or does not work at all, which fails the MOT.
What to check: Check the engine light goes out after start-up and ask for a fault-code scan: codes can be cleared before a sale.
Check a Chrysler Crossfire by registration
Which emissions and leak problems should I check for on a used Chrysler Crossfire?
The emissions and leak defects recorded most often on Chrysler Crossfires, 2019–2024, per 100 tests.
- Engine warning light on1.76Major
What to check: Check the engine light goes out after start-up and ask for a fault-code scan: codes can be cleared before a sale.
- Fuel mixture reading out of range1.00Major
What to check: Ask whether an oxygen sensor or the catalytic converter was replaced, and check the engine warning light is out.
- Emissions test could not be done0.28Major
What to check: Ask why the test could not be done, and look for oil leaks, warning lights or an engine that runs roughly.
- An induction or exhaust leak that could affect emissions levels0.23
What to check: Ask the seller what was repaired, and when.
- Exhaust emissions too high0.22Major
What to check: Ask what repair fixed it, and on the drive watch for rough idling, hesitation or a smell of fuel.
One test can record several defects, so this is not the share of Chrysler Crossfires.
Each tip applies only if the car you are looking at has that fault in its own MOT history.
All DVSA descriptions in this group (5)
| DVSA description | In plain words | Recorded | Per 100 tests |
|---|---|---|---|
| Engine MIL illuminated indicating a malfunction | Engine warning light on | 245 | 1.76 |
| Lambda coefficient outside the default limits or the range specified by the manufacturer | Fuel mixture reading out of range | 140 | 1 |
| Emissions test unable to be completed | Emissions test could not be done | 39 | 0.28 |
| An induction or exhaust leak that could affect emissions levels | An induction or exhaust leak that could affect emissions levels | 32 | 0.23 |
| Emissions levels exceed default limits | Exhaust emissions too high | 31 | 0.22 |
How are these figures calculated?
Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.
The comparison uses 13,934 initial tests. The difference is −4.78 defects per 100 tests (95% interval −5.27 to −4.29).
Download the full dataset (CSV) · All models on noise, emissions and leaks
More on the Chrysler Crossfire
- Overview:
- Model overview · All Chrysler models
- What fails:
- body · brakes · plates · lights · emissions · wheels · seat belts · steering · suspension · tyres · visibility
- By area:
- Postcode areas
- Similar cars on noise, emissions and leaks:
- Nissan Pickup · Ford Cortina
- Group ranking:
- All cars on noise, emissions and leaks