Does the Audi Q3 have more suspension problems than other cars its age?

Audi Q3s have suspension problems recorded about as often as other cars their age.

per 100 tests
5.71 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 6.09 per 100 tests

One test can record several defects, so this is not the share of Audi Q3s.

Data: DVSA MOT results · 2019–2024 · 604,043 tests

Check an Audi Q3 by registration

How often do suspension advisories on Audi Q3s turn into fails?

10.5% of suspension advisories on Audi Q3s turned into suspension fails at the next MOT.

Typically, the next MOT came 12 months and 7,736 miles later.

Based on 42,038 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which suspension problem is recorded most on the Audi Q3?

Broken or weakened suspension spring: recorded 17,943 times in 2019–2024, or 2.97 per 100 tests.

A suspension spring, or a bracket that holds it, is broken, cracked or badly weakened, which fails the MOT.

What to check: Look behind each wheel at the coil springs for a snapped end, and check the car sits level from side to side.

Check an Audi Q3 by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which suspension problems should I check for on a used Audi Q3?

The suspension defects recorded most often on Audi Q3s, 2019–2024, per 100 tests.

  • Broken or weakened suspension spring2.97
    Major

    What to check: Look behind each wheel at the coil springs for a snapped end, and check the car sits level from side to side.

  • Worn suspension bush or joint1.56
    Major

    What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.

  • Shock absorber leaking or failed0.43
    Major

    What to check: Look behind the wheels for oily, wet shock absorbers, and push down hard on each corner: it should rise once and settle.

  • Suspension joint cover split or missing0.20
    Major

    What to check: Ask whether the ball joint was replaced along with its cover: a joint that ran unprotected wears quickly and knocks over bumps.

  • Suspension part rusted or damaged0.17
    Major

    What to check: Look under the car at the suspension arms and anti-roll bar for flaking rust, or bends from hitting a kerb.

One test can record several defects, so this is not the share of Audi Q3s.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Audi Q3: suspension defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
A spring or spring component fractured or seriously weakenedBroken or weakened suspension spring17,9432.97
A suspension pin, bush or joint excessively wornWorn suspension bush or joint9,4491.56
A shock absorber damaged to the extent that it does not function or showing signs of severe leakageShock absorber leaking or failed2,5950.43
A suspension joint dust cover missing or no longer prevents the ingress of dirt etcSuspension joint cover split or missing1,2330.2
A suspension component excessively damaged or corrodedSuspension part rusted or damaged1,0570.17

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 604,043 initial tests. The difference is −0.38 defects per 100 tests (95% interval −0.44 to −0.32).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on suspension