Does the Alfa Romeo Brera have more suspension problems than other cars its age?
Alfa Romeo Breras do have suspension problems recorded, but less often than other cars their age.
- per 100 tests
- 24.33 per 100 testsdefects recorded at first MOT tests
Expected for cars of the same age: 27.40 per 100 tests
One test can record several defects, so this is not the share of Alfa Romeo Breras.
Data: DVSA MOT results · 2019–2024 · 12,978 tests
Check an Alfa Romeo Brera by registration
How often do suspension advisories on Alfa Romeo Breras turn into fails?
21.1% of suspension advisories on Alfa Romeo Breras turned into suspension fails at the next MOT.
Typically, the next MOT came 12 months and 3,543 miles later.
Based on 2,163 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.
Which suspension problem is recorded most on the Alfa Romeo Brera?
Broken or weakened suspension spring: recorded 1,432 times in 2019–2024, or 11.03 per 100 tests.
A suspension spring, or a bracket that holds it, is broken, cracked or badly weakened, which fails the MOT.
What to check: Look behind each wheel at the coil springs for a snapped end, and check the car sits level from side to side.
Check an Alfa Romeo Brera by registration
Which suspension problems should I check for on a used Alfa Romeo Brera?
The suspension defects recorded most often on Alfa Romeo Breras, 2019–2024, per 100 tests.
- Broken or weakened suspension spring11.03Major
What to check: Look behind each wheel at the coil springs for a snapped end, and check the car sits level from side to side.
- Worn suspension bush or joint5.44Major
What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.
- Suspension part rusted or damaged2.57Major
What to check: Look under the car at the suspension arms and anti-roll bar for flaking rust, or bends from hitting a kerb.
- Rust near suspension or subframe mounts1.02Major
What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.
- Suspension joint cover perished1.02Minor
What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.
One test can record several defects, so this is not the share of Alfa Romeo Breras.
Each tip applies only if the car you are looking at has that fault in its own MOT history.
All DVSA descriptions in this group (5)
| DVSA description | In plain words | Recorded | Per 100 tests |
|---|---|---|---|
| A spring or spring component fractured or seriously weakened | Broken or weakened suspension spring | 1,432 | 11.03 |
| A suspension pin, bush or joint excessively worn | Worn suspension bush or joint | 706 | 5.44 |
| A suspension component excessively damaged or corroded | Suspension part rusted or damaged | 333 | 2.57 |
| The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired | Rust near suspension or subframe mounts | 132 | 1.02 |
| A suspension joint dust cover severely deteriorated | Suspension joint cover perished | 132 | 1.02 |
How are these figures calculated?
Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.
The comparison uses 12,978 initial tests. The difference is −3.07 defects per 100 tests (95% interval −3.97 to −2.17).
More on the Alfa Romeo Brera
- Overview:
- Model overview · All Alfa Romeo models
- What fails:
- body · brakes · plates · lights · emissions · wheels · seat belts · steering · suspension · tyres · visibility
- By area:
- Postcode areas
- Similar cars on suspension:
- Ford Ranger · MINI Clubman
- Group ranking:
- All cars on suspension