Does the Volvo 700 Series have more seat belt and airbag problems than other cars its age?

Volvo 700 Series models have seat belt and airbag problems recorded more often than other cars their age.

per 100 tests
3.96 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 3.27 per 100 tests

One test can record several defects, so this is not the share of Volvo 700 Series models.

Data: DVSA MOT results · 2019–2024 · 4,070 tests

Check a Volvo 700 Series by registration

Which seat belt and airbag problem is recorded most on the Volvo 700 Series?

Rust near seat belt mountings: recorded 124 times in 2019–2024, or 3.05 per 100 tests.

The metal near a seat belt mounting is badly rusted or poorly repaired, weakening the belt's anchor point, which fails the MOT.

What to check: Check the sills and floor around the seat belt mountings for rust and patch repairs.

Check a Volvo 700 Series by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which seat belt and airbag problems should I check for on a used Volvo 700 Series?

The seat belt and airbag defects recorded most often on Volvo 700 Series models, 2019–2024, per 100 tests.

  • Rust near seat belt mountings3.05
    Major

    What to check: Check the sills and floor around the seat belt mountings for rust and patch repairs.

One test can record several defects, so this is not the share of Volvo 700 Series models.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (1)
Volvo 700 Series: seat belt and airbag defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repairedRust near seat belt mountings1243.05

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 4,070 initial tests. The difference is +0.69 defects per 100 tests (95% interval +0.07 to +1.30).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on seat belts and airbags