Does the Peugeot 407 have more emissions and leak problems than other cars its age?

Peugeot 407s do have emissions and leak problems recorded, but less often than other cars their age.

per 100 tests
6.27 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 6.90 per 100 tests

One test can record several defects, so this is not the share of Peugeot 407s.

Data: DVSA MOT results · 2019–2024 · 102,439 tests

Check a Peugeot 407 by registration

How often do emissions and leak advisories on Peugeot 407s turn into fails?

7.4% of emissions and leak advisories on Peugeot 407s turned into emissions and leak fails at the next MOT.

Typically, the next MOT came 12 months and 5,285 miles later.

Based on 8,959 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which emissions and leak problem is recorded most on the Peugeot 407?

Diesel smoke over the limit: recorded 1,980 times in 2019–2024, or 1.93 per 100 tests.

A diesel engine's exhaust smoke was denser than the carmaker's limit, which fails the MOT.

What to check: Watch the exhaust while someone revs the engine: heavy black smoke points to injector, turbo or particulate filter trouble.

Check a Peugeot 407 by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which emissions and leak problems should I check for on a used Peugeot 407?

The emissions and leak defects recorded most often on Peugeot 407s, 2019–2024, per 100 tests.

  • Diesel smoke over the limit1.93
    Major

    What to check: Watch the exhaust while someone revs the engine: heavy black smoke points to injector, turbo or particulate filter trouble.

  • Engine warning light on1.92
    Major

    What to check: Check the engine light goes out after start-up and ask for a fault-code scan: codes can be cleared before a sale.

  • Smoke opacity levels exceed default limit0.50

    What to check: Ask the seller what was repaired, and when.

  • Emissions test could not be done0.34
    Major

    What to check: Ask why the test could not be done, and look for oil leaks, warning lights or an engine that runs roughly.

  • Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users0.29

    What to check: Ask the seller what was repaired, and when.

One test can record several defects, so this is not the share of Peugeot 407s.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Peugeot 407: emissions and leak defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
Smoke opacity levels exceed the manufacturer's specified limitDiesel smoke over the limit1,9801.93
Engine MIL illuminated indicating a malfunctionEngine warning light on1,9661.92
Smoke opacity levels exceed default limitSmoke opacity levels exceed default limit5140.5
Emissions test unable to be completedEmissions test could not be done3470.34
Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road usersFluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users2980.29

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 102,439 initial tests. The difference is −0.63 defects per 100 tests (95% interval −0.79 to −0.47).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on noise, emissions and leaks