Does the Peugeot 406 have more brake problems than other cars its age?

Peugeot 406s have brake problems recorded more often than other cars their age.

per 100 tests
34.58 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 25.04 per 100 tests

One test can record several defects, so this is not the share of Peugeot 406s.

Data: DVSA MOT results · 2019–2024 · 38,499 tests

Check a Peugeot 406 by registration

How often do brake advisories on Peugeot 406s turn into fails?

22.4% of brake advisories on Peugeot 406s turned into brake fails at the next MOT.

Typically, the next MOT came 12 months and 3,351 miles later.

Based on 8,628 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which brake problem is recorded most on the Peugeot 406?

Handbrake too weak: recorded 2,256 times in 2019–2024, or 5.86 per 100 tests.

The handbrake did not hold strongly enough on the brake tester, which fails the MOT.

What to check: Check the handbrake holds the car on a steep slope without the lever rising to the top of its travel.

Check a Peugeot 406 by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which brake problems should I check for on a used Peugeot 406?

The brake defects recorded most often on Peugeot 406s, 2019–2024, per 100 tests.

  • Handbrake too weak5.86
    Major

    What to check: Check the handbrake holds the car on a steep slope without the lever rising to the top of its travel.

  • Uneven braking side to side4.12
    Major

    What to check: Brake firmly on a quiet straight road and check the car stops in a straight line.

  • Brake dragging when released3.03
    Major

    What to check: Check the car rolls freely when coasting and does not pull to one side.

  • Brake pipe rusted or damaged2.87
    Major

    What to check: Look along the underside at the metal brake pipes for flaking rust, and ask whether they were renewed.

  • Brake pads or shoes dangerously thin1.93
    Dangerous

    What to check: Look through the wheels at the pads and discs, listen for grinding, and ask when they were last replaced.

One test can record several defects, so this is not the share of Peugeot 406s.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Peugeot 406: brake defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
Parking brake efficiency below minimum requirementHandbrake too weak2,2565.86
Brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.Uneven braking side to side1,5864.12
Significant brake effort recorded with no brake applied indicating a binding brakeBrake dragging when released1,1673.03
Brake pipe damaged or excessively corrodedBrake pipe rusted or damaged1,1062.87
a brake lining or pad worn below 1.5mmBrake pads or shoes dangerously thin7421.93

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 38,499 initial tests. The difference is +9.54 defects per 100 tests (95% interval +8.95 to +10.12).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on brakes