Does the Mitsubishi Shogun Pinin have more suspension problems than other cars its age?

Mitsubishi Shogun Pinins have suspension problems recorded more often than other cars their age.

per 100 tests
54.89 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 32.17 per 100 tests

One test can record several defects, so this is not the share of Mitsubishi Shogun Pinins.

Data: DVSA MOT results · 2019–2024 · 14,887 tests

Check a Mitsubishi Shogun Pinin by registration

How often do suspension advisories on Mitsubishi Shogun Pinins turn into fails?

28.0% of suspension advisories on Mitsubishi Shogun Pinins turned into suspension fails at the next MOT.

Typically, the next MOT came 12 months and 2,778 miles later.

Based on 3,242 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which suspension problem is recorded most on the Mitsubishi Shogun Pinin?

Rust near suspension or subframe mounts: recorded 5,607 times in 2019–2024, or 37.66 per 100 tests.

The metal near a suspension, spring or subframe mounting is badly rusted, damaged or poorly repaired, which fails the MOT.

What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.

Check a Mitsubishi Shogun Pinin by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which suspension problems should I check for on a used Mitsubishi Shogun Pinin?

The suspension defects recorded most often on Mitsubishi Shogun Pinins, 2019–2024, per 100 tests.

  • Rust near suspension or subframe mounts37.66
    Major

    What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.

  • Worn suspension bush or joint4.33
    Major

    What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.

  • Suspension joint cover perished2.98
    Minor

    What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.

  • The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected2.53

    What to check: Ask the seller what was repaired, and when.

  • Suspension part rusted or damaged1.66
    Major

    What to check: Look under the car at the suspension arms and anti-roll bar for flaking rust, or bends from hitting a kerb.

One test can record several defects, so this is not the share of Mitsubishi Shogun Pinins.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Mitsubishi Shogun Pinin: suspension defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repairedRust near suspension or subframe mounts5,60737.66
A suspension pin, bush or joint excessively wornWorn suspension bush or joint6454.33
A suspension joint dust cover severely deterioratedSuspension joint cover perished4442.98
The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affectedThe strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected3772.53
A suspension component excessively damaged or corrodedSuspension part rusted or damaged2471.66

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 14,887 initial tests. The difference is +22.72 defects per 100 tests (95% interval +21.53 to +23.91).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on suspension