Does the Honda Insight have more suspension problems than other cars its age?
Honda Insights do have suspension problems recorded, but less often than other cars their age.
- per 100 tests
- 8.79 per 100 testsdefects recorded at first MOT tests
Expected for cars of the same age: 19.13 per 100 tests
One test can record several defects, so this is not the share of Honda Insights.
Data: DVSA MOT results · 2019–2024 · 59,456 tests
Check a Honda Insight by registration
How often do suspension advisories on Honda Insights turn into fails?
12.7% of suspension advisories on Honda Insights turned into suspension fails at the next MOT.
Typically, the next MOT came 12 months and 7,069 miles later.
Based on 4,764 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.
Which suspension problem is recorded most on the Honda Insight?
Suspension joint cover split or missing: recorded 1,482 times in 2019–2024, or 2.49 per 100 tests.
The rubber cover on a suspension ball joint is split or missing, letting in dirt and water, which fails the MOT.
What to check: Ask whether the ball joint was replaced along with its cover: a joint that ran unprotected wears quickly and knocks over bumps.
Check a Honda Insight by registration
Which suspension problems should I check for on a used Honda Insight?
The suspension defects recorded most often on Honda Insights, 2019–2024, per 100 tests.
- Suspension joint cover split or missing2.49Major
What to check: Ask whether the ball joint was replaced along with its cover: a joint that ran unprotected wears quickly and knocks over bumps.
- Suspension joint cover perished2.21Minor
What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.
- Worn suspension bush or joint1.78Major
What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.
- Rust near suspension or subframe mounts0.92Major
What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.
- Shock absorber leaking or failed0.60Major
What to check: Look behind the wheels for oily, wet shock absorbers, and push down hard on each corner: it should rise once and settle.
One test can record several defects, so this is not the share of Honda Insights.
Each tip applies only if the car you are looking at has that fault in its own MOT history.
All DVSA descriptions in this group (5)
| DVSA description | In plain words | Recorded | Per 100 tests |
|---|---|---|---|
| A suspension joint dust cover missing or no longer prevents the ingress of dirt etc | Suspension joint cover split or missing | 1,482 | 2.49 |
| A suspension joint dust cover severely deteriorated | Suspension joint cover perished | 1,316 | 2.21 |
| A suspension pin, bush or joint excessively worn | Worn suspension bush or joint | 1,059 | 1.78 |
| The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired | Rust near suspension or subframe mounts | 549 | 0.92 |
| A shock absorber damaged to the extent that it does not function or showing signs of severe leakage | Shock absorber leaking or failed | 359 | 0.6 |
How are these figures calculated?
Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.
The comparison uses 59,456 initial tests. The difference is −10.34 defects per 100 tests (95% interval −10.70 to −9.99).
More on the Honda Insight
- Overview:
- Model overview · All Honda models
- What fails:
- body · brakes · plates · lights · emissions · wheels · seat belts · steering · suspension · tyres · visibility
- Abroad:
- Finland · the Netherlands
- By area:
- Postcode areas
- Similar cars on suspension:
- Porsche Cayenne · Nissan Kubistar
- Group ranking:
- All cars on suspension