Does the Bentley Brooklands have more suspension problems than other cars its age?

Bentley Brooklands models do have suspension problems recorded, but less often than other cars their age.

per 100 tests
10.47 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 23.40 per 100 tests

One test can record several defects, so this is not the share of Bentley Brooklands models.

Data: DVSA MOT results · 2019–2024 · 2,751 tests

Check a Bentley Brooklands by registration

Which suspension problem is recorded most on the Bentley Brooklands?

Suspension joint cover perished: recorded 65 times in 2019–2024, or 2.36 per 100 tests.

The rubber cover on a suspension ball joint is badly perished but still keeps dirt out, so it is minor and the car passes.

What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.

Check a Bentley Brooklands by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which suspension problems should I check for on a used Bentley Brooklands?

The suspension defects recorded most often on Bentley Brooklands models, 2019–2024, per 100 tests.

  • Suspension joint cover perished2.36
    Minor

    What to check: Look at the ball joint covers behind the front wheels: once a cover splits, the joint wears out.

  • Broken or weakened suspension spring2.18
    Major

    What to check: Look behind each wheel at the coil springs for a snapped end, and check the car sits level from side to side.

  • Worn suspension bush or joint1.42
    Major

    What to check: Listen for knocks over speed bumps, feel for the car wandering under braking, and ask which part was replaced.

  • Suspension joint cover split or missing1.13
    Major

    What to check: Ask whether the ball joint was replaced along with its cover: a joint that ran unprotected wears quickly and knocks over bumps.

  • Rust near suspension or subframe mounts1.09
    Major

    What to check: Look under the car around the suspension mountings for rust holes, patch welds or fresh underseal hiding rust.

One test can record several defects, so this is not the share of Bentley Brooklands models.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Bentley Brooklands: suspension defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
A suspension joint dust cover severely deterioratedSuspension joint cover perished652.36
A spring or spring component fractured or seriously weakenedBroken or weakened suspension spring602.18
A suspension pin, bush or joint excessively wornWorn suspension bush or joint391.42
A suspension joint dust cover missing or no longer prevents the ingress of dirt etcSuspension joint cover split or missing311.13
The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repairedRust near suspension or subframe mounts301.09

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 2,751 initial tests. The difference is −12.93 defects per 100 tests (95% interval −14.74 to −11.12).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on suspension