Does the Audi 80 have more brake problems than other cars its age?

Audi 80s have brake problems recorded more often than other cars their age.

per 100 tests
26.05 per 100 testsdefects recorded at first MOT tests

Expected for cars of the same age: 20.74 per 100 tests

One test can record several defects, so this is not the share of Audi 80s.

Data: DVSA MOT results · 2019–2024 · 6,661 tests

Check an Audi 80 by registration

How often do brake advisories on Audi 80s turn into fails?

17.2% of brake advisories on Audi 80s turned into brake fails at the next MOT.

Typically, the next MOT came 12 months and 1,338 miles later.

Based on 1,337 advisories, each followed to the car's next MOT, 2019–2024. This counts advisories, not cars.

Which brake problem is recorded most on the Audi 80?

Handbrake too weak: recorded 264 times in 2019–2024, or 3.96 per 100 tests.

The handbrake did not hold strongly enough on the brake tester, which fails the MOT.

What to check: Check the handbrake holds the car on a steep slope without the lever rising to the top of its travel.

Check an Audi 80 by registration

For example, AB12 CDE

Before you submit. Enter a UK registration to compare this vehicle with similar cars: statistical information, not vehicle condition advice. It goes to the DVSA MOT History API, never into URLs or analytics, and any cache expires within 15 minutes. MOT history is free on GOV.UK and we do not sell it; read how we use your data.

Free to use. Independent site. Not affiliated with DVSA, DVLA or GOV.UK.

Which brake problems should I check for on a used Audi 80?

The brake defects recorded most often on Audi 80s, 2019–2024, per 100 tests.

  • Handbrake too weak3.96
    Major

    What to check: Check the handbrake holds the car on a steep slope without the lever rising to the top of its travel.

  • Uneven braking side to side2.21
    Major

    What to check: Brake firmly on a quiet straight road and check the car stops in a straight line.

  • Brake hose cracked or chafed1.85
    Major

    What to check: Turn the steering to full lock and check the rubber brake hoses behind the front wheels for cracks or rubbing.

  • Brake dragging when released1.68
    Major

    What to check: Check the car rolls freely when coasting and does not pull to one side.

  • A brake hose ferrule excessively corroded1.62

    What to check: Ask the seller what was repaired, and when.

One test can record several defects, so this is not the share of Audi 80s.

Each tip applies only if the car you are looking at has that fault in its own MOT history.

All DVSA descriptions in this group (5)
Audi 80: brake defects recorded at MOTs, 2019–2024, 30 or more each
DVSA descriptionIn plain wordsRecordedPer 100 tests
Parking brake efficiency below minimum requirementHandbrake too weak2643.96
Brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.Uneven braking side to side1472.21
A flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched Brake hose cracked or chafed1231.85
Significant brake effort recorded with no brake applied indicating a binding brakeBrake dragging when released1121.68
A brake hose ferrule excessively corrodedA brake hose ferrule excessively corroded1081.62

Download these figures (CSV)

How are these figures calculated?

Defects are counted at first MOT tests, 2019–2024. The expected rate is for cars with the same mix of ages.

The comparison uses 6,661 initial tests. The difference is +5.31 defects per 100 tests (95% interval +4.08 to +6.53).

Full methodology

How to cite these figures

Download the full dataset (CSV) · All models on brakes